Phone Systems

Previous Thread
Next Thread
Print Thread
Rate Thread
CO LINE RINGING AT SV8100
#570650 04/22/14 06:56 PM
Joined: Aug 2010
Posts: 35
Member
OP Offline
Member
Joined: Aug 2010
Posts: 35
Hi everyone,
I have an installation of sv8100 with 40 digitel and 12 analog extensions.Two pstn lines are connected to system and group 1 is line 1, group 2 is line 2. Line number 2 is working perfectly and it is ringing at programed extension without any trouble. Line number 1 programed for 13 extensions to ring , but it will ring one or two times only. it is not ringing contionusly.but the button led gives red. after some times the same will repete ringing for two times. what will be the program mistake.
Thanks,
V.satheesh

Re: CO LINE RINGING AT SV8100
satheesh #570703 04/23/14 12:47 PM
Joined: Apr 2005
Posts: 2,388
Member
*****
Offline
Member
*****
Joined: Apr 2005
Posts: 2,388
Do you have group 2 in a different timer class?


We get old too soon, smart too late
Re: CO LINE RINGING AT SV8100
satheesh #570711 04/23/14 02:50 PM
Joined: Aug 2010
Posts: 35
Member
OP Offline
Member
Joined: Aug 2010
Posts: 35
Both lines are in same timer class.

Re: CO LINE RINGING AT SV8100
satheesh #570721 04/23/14 04:39 PM
Joined: Apr 2005
Posts: 2,388
Member
*****
Offline
Member
*****
Joined: Apr 2005
Posts: 2,388
You need to check settings under 22-XX and match up with the lines that are working.


We get old too soon, smart too late
Re: CO LINE RINGING AT SV8100
satheesh #570749 04/24/14 02:52 AM
Joined: Aug 2010
Posts: 35
Member
OP Offline
Member
Joined: Aug 2010
Posts: 35
line 2 is working fine without any complint. so i shifted line 1 to 2nd port(line 2 port)for testing. still i am getting same result.after two or three rings the ringer will stop. I have disconnected the line from PABX and checked the same line connected with direct analog telephone also. In analog telephone there is no any complint. it is ringing continusly.
Thanks
satheesh

Re: CO LINE RINGING AT SV8100
satheesh #570754 04/24/14 04:38 AM
Joined: Jul 2005
Posts: 1,325
Member
*****
Offline
Member
*****
Joined: Jul 2005
Posts: 1,325
In PRG 22.08 are the problem trunks going to a different destination that the ones that work??


Regards,

Paul W
Now back to a 0 day week. Love these 7 day weekends.
Re: CO LINE RINGING AT SV8100
satheesh #570778 04/24/14 04:21 PM
Joined: Aug 2010
Posts: 35
Member
OP Offline
Member
Joined: Aug 2010
Posts: 35
I have checked PRG 22.08. all trunks are in default 0. not yet programed.
Thanks
satheesh

Re: CO LINE RINGING AT SV8100
satheesh #570921 04/28/14 01:46 PM
Joined: Feb 2013
Posts: 122
Member
Offline
Member
Joined: Feb 2013
Posts: 122
You need to change the type of trunk to DIL in command 22-02
then go to command 22-07 and put the pilot number of the group against the trunk

or Try with this command 81-01-09
Default=63 try different value here e.g. 68, 72, 58

check if you enable caller ID on the trunks doesn't has caller ID from provider


NEC Business Partner
Certified on SV8100,SV8500,SL1000
Re: CO LINE RINGING AT SV8100
satheesh #570926 04/28/14 02:44 PM
Joined: May 2003
Posts: 2,918
Member
*****
Offline
Member
*****
Joined: May 2003
Posts: 2,918
Man says he put line into a Known Working Port, still has problem and problem follows LINE. Problem in line.. HE did not say if line 2 worked ok in port 1.

Problem port 1. PORT 2 ok. Moved line 1 to port 2, problem follow line. Should also put line 2 in port 1 and test.


Moderated by  DrPbx, ttech 

Link Copied to Clipboard
Forum Search
Most Recent 5 Post
Handset can call out, but not receive calls
by WildBill - 08/06/20 06:01 PM
Abandoned/Obsolete Armored Copper Drop.
by dexman - 08/06/20 12:10 AM
NEC Cordless Phones
by teldata1 - 08/05/20 09:31 AM
SV9100 Call forwding to voice mail
by teldata1 - 08/05/20 09:24 AM
Help!! Mitel 200 ICP mailbox 0 being hacked
by EPearson - 08/04/20 09:16 PM
Who's Online Now
35 members (justbill, LoonCreek, Keyset6, JBean3329, mbhydro, Ruben, NateBates, PortlandTech, nortelvoip, pvj, Professor Shadow, Rok1215, hbiss, Bob3470, BobRobert, Carl Navarro, RonP, RATHER BE FISHING, newtecky, gertter, Touch Tone Tommy, jlspeck, KRRath, teleco, gelehu, Yoda, Iwatsu Guru, iatech3800, vicbob, metelcom, dexman, teldata1, Skunky, morephones, bmerri19), 597 guests, and 71 robots.
Key: Admin, Global Mod, Mod
Popular Topics (Views)
Forum Statistics
Forums94
Topics93,864
Posts636,741
Members49,329
Most Online5,661
May 23rd, 2018
Today's Birthdays
newbieadmin, redshift, tricki0702
Newest Members
bmerri19, Henry VIII, jmontler, barryv, carag62
49328 Registered Users
Get Tech Support Now! Click the banner below
Get Tech Support Now!
EMP & Lightning Home Surge Protection
EMP - Click Here!
Top Posters (30 Days)
dexman 38
Ruben 20
DonaldR 17
hbiss 16
Bluewater Sailing
https://www.patreon.com/bePatron?u=5256033
EMP Shield for Commercial - Home & Vehicle
Use Coupon code SAVE - Click Here!
Servpro Ventura 24-Hour Emergency Service
Free Estimates call us now 24Hours
Contact Us | Telephone System Tech Support | Terms of Service

Sundance Communications is not affiliated with any of the above manufacturers.
©Copyright Sundance Communications 1998-2020
Trusted Partners