|
Joined: Aug 2010
Posts: 38
Member
|
OP
Member
Joined: Aug 2010
Posts: 38 |
Hi everyone, I have an installation of sv8100 with 40 digitel and 12 analog extensions.Two pstn lines are connected to system and group 1 is line 1, group 2 is line 2. Line number 2 is working perfectly and it is ringing at programed extension without any trouble. Line number 1 programed for 13 extensions to ring , but it will ring one or two times only. it is not ringing contionusly.but the button led gives red. after some times the same will repete ringing for two times. what will be the program mistake. Thanks, V.satheesh
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
Joined: Apr 2005
Posts: 2,498 Likes: 2
Member
|
Member
Joined: Apr 2005
Posts: 2,498 Likes: 2 |
Do you have group 2 in a different timer class?
We get old too soon, smart too late
|
|
|
|
Joined: Aug 2010
Posts: 38
Member
|
OP
Member
Joined: Aug 2010
Posts: 38 |
Both lines are in same timer class.
|
|
|
|
Joined: Apr 2005
Posts: 2,498 Likes: 2
Member
|
Member
Joined: Apr 2005
Posts: 2,498 Likes: 2 |
You need to check settings under 22-XX and match up with the lines that are working.
We get old too soon, smart too late
|
|
|
|
Joined: Aug 2010
Posts: 38
Member
|
OP
Member
Joined: Aug 2010
Posts: 38 |
line 2 is working fine without any complint. so i shifted line 1 to 2nd port(line 2 port)for testing. still i am getting same result.after two or three rings the ringer will stop. I have disconnected the line from PABX and checked the same line connected with direct analog telephone also. In analog telephone there is no any complint. it is ringing continusly. Thanks satheesh
|
|
|
|
Joined: Jul 2005
Posts: 1,333
Member
|
Member
Joined: Jul 2005
Posts: 1,333 |
In PRG 22.08 are the problem trunks going to a different destination that the ones that work??
Regards,
Paul W Now back to a 0 day week. Love these 7 day weekends.
|
|
|
|
Joined: Aug 2010
Posts: 38
Member
|
OP
Member
Joined: Aug 2010
Posts: 38 |
I have checked PRG 22.08. all trunks are in default 0. not yet programed. Thanks satheesh
|
|
|
|
Joined: Feb 2013
Posts: 122
Member
|
Member
Joined: Feb 2013
Posts: 122 |
You need to change the type of trunk to DIL in command 22-02 then go to command 22-07 and put the pilot number of the group against the trunk
or Try with this command 81-01-09 Default=63 try different value here e.g. 68, 72, 58
check if you enable caller ID on the trunks doesn't has caller ID from provider
NEC Business Partner Certified on SV8100,SV8500,SL1000
|
|
|
|
Joined: May 2003
Posts: 2,924
Member
|
Member
Joined: May 2003
Posts: 2,924 |
Man says he put line into a Known Working Port, still has problem and problem follows LINE. Problem in line.. HE did not say if line 2 worked ok in port 1.
Problem port 1. PORT 2 ok. Moved line 1 to port 2, problem follow line. Should also put line 2 in port 1 and test.
|
|
|
Forums84
Topics94,262
Posts638,697
Members49,757
|
Most Online5,661 May 23rd, 2018
|
|
|
|