sundance-communications.com/forum Forums TDM Business Telephone Systems Nortel Telephones & Systems CID on CICS

Print Thread

Rate Thread

Page 1 of 2

CID on CICS #591513 07/26/15 01:29 PM
Joined: Mar 2002 Posts: 277 Trenton,Mi. USA pfonman Member
pfonman Member Joined: Mar 2002 Posts: 277 Trenton,Mi. USA	How do I program the CID to display on all phones while the phone is ringing?? I know it will display on the phone that answers, after they answer, but how about before they answer? Pfonman [email protected]

Nortel Phone System Service

Nortel Phone System Service in Canada

Do you need a Nortel Phone System technician or specific Nortel parts?
Atcom to the rescue! Our telephone techs have qualified experience servicing and troubleshooting Nortel CICS, MICS, & BCM telephone systems.
Service in Canada from sea to sea.

Re: CID on CICS pfonman #591524 07/27/15 06:57 AM
Joined: Feb 2005 Posts: 1,615 Likes: 1 Toronto, Canada Curlycord Member
Curlycord Member Joined: Feb 2005 Posts: 1,615 Likes: 1 Toronto, Canada	What software version do you have? =---()))))))))---= www.curlycord.com Toronto, Canada

Re: CID on CICS pfonman #591536 07/27/15 03:53 PM
Joined: Mar 2002 Posts: 277 Trenton,Mi. USA pfonman Member
pfonman Member Joined: Mar 2002 Posts: 277 Trenton,Mi. USA	4.1 SP 30NfGoo NAT [email protected]

Re: CID on CICS pfonman #591539 07/27/15 04:05 PM
Joined: Feb 2005 Posts: 1,615 Likes: 1 Toronto, Canada Curlycord Member
Curlycord Member Joined: Feb 2005 Posts: 1,615 Likes: 1 Toronto, Canada	You need 6.1 or higher for more than 1 phone to auto show CLID. All others sets must have a F811 key or press F811 or Remove ringing from all asets and have AA handle the calls after 2 rings. on 6.1 Under Set&Terms/2XX/TelcoFeatures/ look for each line that assigned. =---()))))))))---= www.curlycord.com Toronto, Canada

Re: CID on CICS pfonman #591547 07/27/15 08:39 PM
Joined: Mar 2002 Posts: 277 Trenton,Mi. USA pfonman Member
pfonman Member Joined: Mar 2002 Posts: 277 Trenton,Mi. USA	Ok I will upgrade wed. when I have the new software. [email protected]

Re: CID on CICS pfonman #591572 07/28/15 03:21 PM
Joined: Mar 2002 Posts: 277 Trenton,Mi. USA pfonman Member
pfonman Member Joined: Mar 2002 Posts: 277 Trenton,Mi. USA	New problem change software card to 7.1 & the system won't come up just keeps blinking. What do I do now? [email protected]

Re: CID on CICS pfonman #591573 07/28/15 03:34 PM
Joined: Mar 2002 Posts: 277 Trenton,Mi. USA pfonman Member
pfonman Member Joined: Mar 2002 Posts: 277 Trenton,Mi. USA	Phones are all 7310, let it be they have to be 7316, or should I go back to 6.1 software? [email protected]

Re: CID on CICS pfonman #591574 07/28/15 03:41 PM
Joined: Feb 2005 Posts: 1,615 Likes: 1 Toronto, Canada Curlycord Member
Curlycord Member Joined: Feb 2005 Posts: 1,615 Likes: 1 Toronto, Canada	7310's are ok but you cant just go from 4.1 to 7.1 without using the proper upgrade procedures. Either use the proper upgrade tool software per the install guide under Upgrades or if you have 6.1 software handy then go to 6.1, once it takes then go to 7.1 Put the 4.1 back in the meantime. Also watch out for voice mail, you need to make sure it will be compatible or you need to upgrade it also. =---()))))))))---= www.curlycord.com Toronto, Canada

Re: CID on CICS pfonman #591587 07/28/15 09:17 PM
Joined: Mar 2002 Posts: 277 Trenton,Mi. USA pfonman Member
pfonman Member Joined: Mar 2002 Posts: 277 Trenton,Mi. USA	Yeah, I was wondering about the VM, might have to do that one too. I will get a 6.1 tomorrow, & that should solve my troubles. [email protected]

Re: CID on CICS pfonman #591592 07/29/15 07:30 AM
Joined: Feb 2005 Posts: 1,615 Likes: 1 Toronto, Canada Curlycord Member
Curlycord Member Joined: Feb 2005 Posts: 1,615 Likes: 1 Toronto, Canada	Flash you need 1.9 on a 6.1 KSU Flash you need 2.0 on a 7.1 KSU Callpilot you need ANY on a 6.1 Callpilot you need 3.0 on a 7.1 =---()))))))))---= www.curlycord.com Toronto, Canada