sundance-communications.com/forum Forums Other TDM Phone Systems ESI Telephones & Systems ESI -50

Hello got this system moved up from Florida to NH has 7 digital phones 3 IP phones , I can wire up the digital phones ok question is what is needed to get those IP phones going , they shipped the whole phone board to site except looks like a switch or router is missing where the cat5e to ESI network port is missing. also looks line there phone lines were hosted by a Florida company using line 5,6,7,8 because on phone board nothing was wired to co 1 2 3 4

thanks

the Network port ...that is a dual purpose , it can be used for programming and where the IP phones " connect to " sort of.
if nothing was wired to lines 1,2,3,4, it probably has a PRI card in it.
You really need to Connect to it to see what is really there. The IP phones require Licenses in the system

yes there lines 5,6,7,8,9 were set up as pri at new location in NH they had 4 analog lines installed and I installed and programmed them to 6 digital phones works great, here's the situation 1 guy is left in Florida at a home office with a IP phone that he used , system disconnected and now in NH 2 additional IP phones in NH for users
question is how do you make the IP phones work . I see that Florida phone systems took out there network equipment also can run a report and see ext 140 141 142 had ip addresss looking to get the IP set up back on line

At the very least you need to update the programming with the new public IP address. You may possibly need to set up port forwarding on the router / firewall as well.

thanks that public IP from the new Comcast modem gets programming into the esi 50 ?
all so all thats on site is the comcast modem they dont have a router or fire wall in new hamshire

so, does the customer have a static IP ? , you will need 2 internal static IP address you will need a port fwd set up on port 59002 ( TCP) for the NSP, and port fwd set up on 59001 for the IVC ( internal card) UDP
this is the port the IP talk on do you know what software the phone system is running?

thanks Brian I don't know the SW level this system was up and running in Florida now in NH only real difference is a new internet carrier Comcast

update to this install system is up and running 4 line analog lines 1,2,3,4 6 48 button digital phones

comcast modem for internet plugged into 16 port net gear switch Esi 50 plugged into a spare switch port

2 48 Ip phones plugged into switch boot up and find ESI system work fine.

only thing not working is the 1 48 button remote ip phone in a florida home office wont find the system
says lost com link reconnecting. . I did update to new IP address into the ESI system any help
on the remote phone not finding this ESI_50 server

The phone needs to be reprogrammed as well so it knows the new IP address and can go find it. There is software or they can mail the phone back and plug it in locally then send it back to Florida .... or deliver it yourself!

ROAD TRIP!