|
|
|
|
Joined: Jan 2006
Posts: 2,266 Likes: 1
Member
|
|
Member
Joined: Jan 2006
Posts: 2,266 Likes: 1 |
I switched a customer from Windstream SIP trunks over WOW SIP trunks , I had issues with no audio got that fix by setting connection to media server to manual , the problem is with the audio codecs MP-114FXS which is for (2) polycoms and a fax. Now I am getting no audio on those devices and I can't figure it out. HELP PLEASE
Last edited by Steve Mull; 02/28/19 10:04 PM.
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Jan 2010
Posts: 937 Likes: 5
Moderator-Toshiba
|
|
Moderator-Toshiba
Joined: Jan 2010
Posts: 937 Likes: 5 |
Do you have SIP inspections enabled in the firewall?
Did the firewall/router get changed at all during the changeover?
Regards
Carl
|
|
|
|
|
Joined: Jan 2006
Posts: 2,266 Likes: 1
Member
|
|
Member
Joined: Jan 2006
Posts: 2,266 Likes: 1 |
No nothing changed with the customers firewall
|
|
|
|
|
Joined: Aug 2002
Posts: 4,932 Likes: 1
Administrator
|
|
Administrator
Joined: Aug 2002
Posts: 4,932 Likes: 1 |
What codec are you using ?
I would thing the SIP provider could watch what is happening in the traffic stream and tell you right away the problem. At least thats how it is with Mix Networks. I put 12 SIP trunks on an old Telrad yesterday had and audio issue and in 2 minutes he came back with do this I did and audio was up.
|
|
|
|
|
Joined: Jan 2010
Posts: 937 Likes: 5
Moderator-Toshiba
|
|
Moderator-Toshiba
Joined: Jan 2010
Posts: 937 Likes: 5 |
Ask the WOW SIP trunk supplier to change the contact header information in the INVITE to the customers WAN IP address in their SBC at their end and this should fix up your audio issues for the devices.
This is what the IPedge is doing when you change it to the manual setting in the SIP service definition.
Regards
Carl
|
|
|
|
|
Joined: Jun 2005
Posts: 2,722 Likes: 7
Member
|
|
Member
Joined: Jun 2005
Posts: 2,722 Likes: 7 |
I had a similar issue with an old version of an IPEdge using SIP cordless phone. At that time I didn't have Wireshark built into the IPEdge.
I think I had to go into the extension's IPT data - Connection To Media Relay Server: and set that to manual. I don't know if this works like the SIP definition.
|
|
|
|
Forums84
Topics94,516
Posts639,970
Members49,848
| |
Most Online5,661
May 23rd, 2018
|
|
|
|
|
|
![[Linked Image from sundance-communications.com]](https://www.sundance-communications.com/ad-icon/1013.gif){kind=icon}
