|
|
Joined: Sep 2010
Posts: 62
Member
|
OP
Member
Joined: Sep 2010
Posts: 62 |
Hello guys,
We have inter tel version 11. When someone press outgoing and dialed the numbers the phone will go to a dial tone or to idle state. This happen one out five try.
We are rebooting the system tonight, but I want to see if someone experience this before.
Thank you,
Benito
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: May 2009
Posts: 1,198
Member
|
|
Member
Joined: May 2009
Posts: 1,198 |
Sounds like a dead phone line. Dial the trunk access codes individually to test.
|
|
|
|
|
Joined: Sep 2010
Posts: 62
Member
|
|
OP
Member
Joined: Sep 2010
Posts: 62 |
DND ON that was a good idea, but I'm still having the same issue doing it that way.
Thank you,
|
|
|
|
|
Joined: May 2009
Posts: 1,198
Member
|
|
Member
Joined: May 2009
Posts: 1,198 |
Then that's the line that's dead!
Well, let me clarify. That's where to start troubleshooting. Reset the LSC and test the line at the block.
|
|
|
|
Forums84
Topics93,970
Posts637,430
Members49,704
| |
Most Online5,661
May 23rd, 2018
|
|
|
1 members (KRRath),
81
guests, and
33
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
