|
|
|
|
Joined: Jun 2005
Posts: 1
Member
|
|
Member
Joined: Jun 2005
Posts: 1 |
Greetings all,
i have a few questions, i have a customer who has an acs, i purchased the ver 7 admin software to connect to it and reconfigure it. My question is what do i need to do to connect the admin software via laptop to the brain.
Do i need the pcmcia remote admin card?
Do i need some cable?
Where does it connect?
etc... etc...
THANKS!!!
|
|
|
|
|
Joined: Mar 2001
Posts: 7,350
RIP Admin
|
|
RIP Admin
Joined: Mar 2001
Posts: 7,350 |
Your going to need a Remote Access Card. And thats it. Then it's just setting up your internal modem and calling into it with the software.
Russ runs a local service and private tech center. ![[Linked Image from sundance-communications.com]](https://www.sundance-communications.com/installers/logos/65graphic.jpg) [/url]
|
|
|
|
|
Joined: Jun 2005
Posts: 10
Member
|
|
Member
Joined: Jun 2005
Posts: 10 |
Or you can direct connect if you are on site with your laptop to the admin port via the serial connection com port 1 on your pc with a 9 to 25 pin db connector and an rs232 adapter, but you still have to setup the Remote Admin Password #730
[This message has been edited by bmb1475 (edited June 30, 2005).]
|
|
|
|
|
Joined: Jul 2004
Posts: 60
Member
|
|
Member
Joined: Jul 2004
Posts: 60 |
Be aware, the Partner is VERY picky about the modem you are using to dial in with.
|
|
|
|
Forums84
Topics94,531
Posts640,040
Members49,852
| |
Most Online5,661
May 23rd, 2018
|
|
|
1 members (justbill),
165
guests, and
50
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
