|
|
Joined: Feb 2007
Posts: 2,473
Member
|
Member
Joined: Feb 2007
Posts: 2,473 |
Rich is right on. Needs Greeting for option 1 and subs 1.1, 1.2, 1.3 & 1.4 for Outgoing Transfer. In option 1 has to be any other digits for choices(back, home , disc) to complete. Then won't have incomplete tree.
|
|
|
Nortel Phone System Service in Canada
Do you need a Nortel Phone System technician or specific Nortel parts?
Atcom to the rescue! Our telephone techs have qualified experience servicing and troubleshooting Nortel CICS, MICS, & BCM telephone systems.
Service in Canada from sea to sea.
|
|
|
Joined: Mar 2004
Posts: 253
Member
|
Member
Joined: Mar 2004
Posts: 253 |
She did record greeting as per first post and she said shes not getting incomplete tree error. Has to be software mismatch.
|
|
|
|
Joined: Feb 2007
Posts: 2,473
Member
|
Member
Joined: Feb 2007
Posts: 2,473 |
Startting with Rel. 3.1 there is option Disc. digit I belive in Table set up. Go to Table you are using and see or 1 set up for Disc.
|
|
|
|
Joined: Jun 2005
Posts: 370
Member
|
Member
Joined: Jun 2005
Posts: 370 |
Well, I set-up an older flash today with menus and trees and all is going great. One thing I had to change was to record a greeting in the home menu. Otherwise the info messages would play the information and just drop you. I will be back at work next week and need to go back to the customer and get the software releases. Seens funny that I can make this all work on other systems but this one, even though it is set-up like the others will not work. Part of me dosen't really care as this customer went the cheap route and got the system off of the internet to save a few bucks.
Do the job right the first time.
|
|
|
|
Joined: Feb 2005
Posts: 1,615
Member
|
Member
Joined: Feb 2005
Posts: 1,615 |
If not a big system do a Reinstall as suggest.
|
|
|
|
Joined: Jun 2005
Posts: 370
Member
|
Member
Joined: Jun 2005
Posts: 370 |
Just an FYI I tried one more time to delete the tree and rebuild it. Once again, it just would not work. I reinstalled the system and when I programmed it, it worked as it should. Thanks for all the ideas. Stephanie
Do the job right the first time.
|
|
|
|
Joined: Oct 2005
Posts: 24
Member
|
Member
Joined: Oct 2005
Posts: 24 |
Glad you fixed it but sucks you had to reprogram it now I'll never know if the old programming had line supervision on em  that would have been my guess for your problem though.
|
|
|
Forums84
Topics94,512
Posts639,934
Members49,844
|
Most Online5,661 May 23rd, 2018
|
|
0 members (),
138
guests, and
36
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|