|
|
Joined: Feb 2013
Posts: 68
Member
|
OP
Member
Joined: Feb 2013
Posts: 68 |
WHEN PLAYING BACK VOICE MAIL IS THERE A WAY TO SEE CALLER ID FOR THAT CALL?
SYSTEM IS: CTX100 ver. 3.10 MK063 ACTU1A w/DKT 3000 SERIES PHONES. THANKS, DD782
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Jun 2005
Posts: 2,704 Likes: 7
Member
|
|
Member
Joined: Jun 2005
Posts: 2,704 Likes: 7 |
You did not mention they type of voicemail system. If you have caller ID on your lines, then it may be possible to pass caller ID info to the voicemail, but only if the integration is SMDI.
|
|
|
|
|
Joined: Feb 2013
Posts: 68
Member
|
|
OP
Member
Joined: Feb 2013
Posts: 68 |
Sorry, it is a (2) port IVP8
|
|
|
|
|
Joined: Sep 2009
Posts: 162
Member
|
|
Member
Joined: Sep 2009
Posts: 162 |
Under 'System Voicemail Data' enable '04'. Under system data, check '17'.
|
|
|
|
|
Joined: Feb 2013
Posts: 68
Member
|
|
OP
Member
Joined: Feb 2013
Posts: 68 |
checked above settings - still no caller id in voicemail????
|
|
|
|
|
Joined: Jun 2003
Posts: 3,273 Likes: 1
Moderator-Toshiba
|
|
Moderator-Toshiba
Joined: Jun 2003
Posts: 3,273 Likes: 1 |
Newtecky mentioned it already and you haven't confirmed whether or not you are using SMDI. You will need SMDI integration for caller id in Stratagy.
|
|
|
|
|
Joined: Feb 2013
Posts: 68
Member
|
|
OP
Member
Joined: Feb 2013
Posts: 68 |
what locations need to be turned on for SMDI ??
|
|
|
|
|
Joined: Jun 2003
Posts: 3,273 Likes: 1
Moderator-Toshiba
|
|
Moderator-Toshiba
Joined: Jun 2003
Posts: 3,273 Likes: 1 |
Do you have the Stratagy connected to a BSIS port?
|
|
|
|
|
Joined: Feb 2013
Posts: 68
Member
|
|
OP
Member
Joined: Feb 2013
Posts: 68 |
SYSTEM CONSISTS OF: ADKU2--SLOT 1
RCOU3--SLOT 2
RCIU1--SLOT 3
IVP8 --SLOT 4
NO OTHER EMPTY SLOTS ----------------
ANOTHER SYSTEM: DOES A iES32 VM REQUIRE A BSIS CARD ALSO?
Last edited by DD782; 04/11/13 11:32 PM.
|
|
|
|
|
Joined: Jun 2005
Posts: 2,704 Likes: 7
Member
|
|
Member
Joined: Jun 2005
Posts: 2,704 Likes: 7 |
The IVPs requires a BSIS, which is attached directly to the ACTU processor, which then connects via a serial connection to the com port of the IVP8. If there is no cable from the com port of the IVP8 to an attached card on the processor, then SMDI is not possible.
The IES32 does not require a BSIS card because it connects to the CIX processor using an Ethernet IP connection. It can also connect using the com port to a BSIS, but I typicallly enabled SMDI using an IP connection.
|
|
|
|
Forums84
Topics94,282
Posts638,763
Members49,764
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
152
guests, and
180
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
