web statisticsweb stats Business Phone Systems Tech Talk Forum - VOIP & Cloud Phone Help

Business Phone Systems

Previous Thread
Next Thread
Print Thread
Rate Thread
Page 1 of 2 1 2
#86446 09/24/07 02:18 PM
Joined: Sep 2007
Posts: 7
Member
OP Offline
Member
Joined: Sep 2007
Posts: 7
Anyone know why one extension on system will not pick up intercom dial tone, but will pick outside lines. If other extensions dial this extension you can answer it. I have tried the basic trouble shooting, reboot, unplug station , swapped set etc. Any good advice will help.
ty Kevin

Avaya IP Office Help & Support Website
IP Office Help

Avaya IP Office Help & Support Website


FAQs, documentation, videos, updates, and support for the Avaya IP Office business phone system!
Everything you need to know about installing, upgrading, and troubleshooting IP 500v2 and IPO Server Edition systems.

Joined: Jun 2001
Posts: 10,949
Moderator-Avaya
*****
Offline
Moderator-Avaya
*****
Joined: Jun 2001
Posts: 10,949
When you say pick up.........I assume you mean when you left the handset?
If so.........what is your ALS set at for that ext.?
Can you press the intercom button at that ext and then pick up the handset and have intercom dial tone?


Avaya SMB Authorized Business Partner. ACIS/APSS
ESI Certified Reseller/Installer
www.regal-comm.com
Joined: Dec 2005
Posts: 279
Likes: 1
Member
Offline
Member
Joined: Dec 2005
Posts: 279
Likes: 1
I would have to agree with mdaniel. Any extension on the partner system should be able to be set to pick up either intercom tone or dial tone by assigning the ALS (Automatic Line Selection) in system programming.


When I die, I want to go peacefully in my sleep like my grandfather, not screaming and panicking like the passengers in his car.

Joined: Jun 2007
Posts: 356
Member
Offline
Member
Joined: Jun 2007
Posts: 356
CG strikes again!


it's all tip and ring
Joined: Sep 2007
Posts: 7
Member
OP Offline
Member
Joined: Sep 2007
Posts: 7
I guess I should have explain with more detail.

At the idle station 33, I want to make a intercom call to station to station 12, for this example.

I lift the handset and press the intercom button and I clearly get busy tone. It is not a restricted tone.
If station 12 calls station 33 , 33 rings and I can anser the intercom call.
The ASL is set for Outside lines, and I have no trouble answering calls or making call outside.

Thanks again

Joined: Jul 2001
Posts: 3,341
Likes: 10
Moderator-Avaya-Lucent, Antique Tele
*****
Offline
Moderator-Avaya-Lucent, Antique Tele
*****
Joined: Jul 2001
Posts: 3,341
Likes: 10
You press the Intercom button, located directly below Line 1 and/or Line 2, and you hear a Busy Signal??

Or you press a button above the lines that is labeled Ext. 12, and receive a busy signal??

Joined: Jan 2004
Posts: 6,648
RIP Moderator-Nisuko-Tie, General
*****
Offline
RIP Moderator-Nisuko-Tie, General
*****
Joined: Jan 2004
Posts: 6,648
have you swapped the phone with a known good one ?


Skip
------------------------------------

Serving SW and West central Fl since 1984
Joined: Jan 2007
Posts: 1,951
Likes: 2
Member
*****
Offline
Member
*****
Joined: Jan 2007
Posts: 1,951
Likes: 2
Any chance that this extension is programmed as an External Hotline (#311)? If the "predetermined outside number" is incorrectly formed, you will get a busy signal when you go off-hook.

In practice, Hotline phones are strictly 2500 type sets. But there may some weird interaction with a system telephone.

Just a thought.


"Press play and record at the same time" -- Tim Alberstein
Joined: Sep 2007
Posts: 7
Member
OP Offline
Member
Joined: Sep 2007
Posts: 7
This is the 18d telephone and I press the intercom button directly below the line buttons.
Yes I swapped station sets and I have the same problem on that port. With the same set on different port,there is no problem.
I am quiet sure someone has tried progamming this port accidently, but I have never seen the Intercom buttom programmed as something other than intercom.(not DSS)
I am not the highest level of tech when it comes to lucent, but I have more than enough knowledge for the basic troubleshooting and have tried power reboot, swapping stations ect..
If someone could give me the so items to look for I have the manual.

Can the Intercom buttons be reprogrammed?
not the DSS button but the two buttons on 18d telphone below the line buttons.

Thanks kevin

Joined: Jan 2004
Posts: 6,648
RIP Moderator-Nisuko-Tie, General
*****
Offline
RIP Moderator-Nisuko-Tie, General
*****
Joined: Jan 2004
Posts: 6,648
Kevin

which partner are you working with ?

have you tried copying the settings from a extension thats working correctly ?


Skip
------------------------------------

Serving SW and West central Fl since 1984
Page 1 of 2 1 2

Link Copied to Clipboard
Forum Statistics
Forums84
Topics94,262
Posts638,693
Members49,757
Most Online5,661
May 23rd, 2018
Popular Topics(Views)
211,098 Shoretel
187,703 CTX100 install
186,793 1a2 system
Newest Members
BPopilek, Rich F, LewisR, TDKs79, Buttinset
49,757 Registered Users
Top Posters(30 Days)
dexman 18
Toner 14
TDKs79 8
pvj 4
Who's Online Now
1 members (Curlycord), 111 guests, and 236 robots.
Key: Admin, Global Mod, Mod
Contact Us | Sponsored by Atcom: One of the best VoIP Phone Canada Suppliers for your business telephone system!| Terms of Service

Sundance Communications is not affiliated with any of the above manufacturers. Sundance Phone System Forums - VOIP & Cloud Phone Help
©Copyright Sundance Communications 1998-2024
Powered by UBB.threads™ PHP Forum Software 7.7.5