What is the voice T1 connected to when it leaves the Titan on the C.O. side? Does it go directly into the 5ESS as digital or does it go to a channel bank where the 24 circuits are changed to analog and wired to analog OEs. If there is another channel bank there could be a timing issue there.
Also, what does the T1 ride on going from the Titan to the customer? Is it on copper or does it ride in something like a Litespan? That could be another place for a timing problem.
I’m like everyone else. Timing has to be the issue. I know that fax machines being served by a SLC96 will have problems is the SLC remote terminal is not set up to time from the C.O. end.
